Rubber Conveyor Belts

Home > Products » Rubber Conveyor Belts

We are reckoned as one of the most eminent rubber conveying belts suppliers in India. The quality of the materials used in the manufacturing process of rubber conveyor belts are of premium quality that provides durability and resistivity to various unfavorable conditions. Moreover, as these are also prevented from abrasion, the performance rate is higher in comparison to the ordinary belts available in the global market. The industrial rubber conveyor belts are available in various grades to suit the requirement of the customers. In addition to it, these are also available in varied size ranging from 150mm to 1500mm. We also provide cotton belts and nylon & EP belts at the most reasonable prices.

The Essential Characteristics of GI Conveyor Belts are: -

High tensile resistance with low elongation.

Good troughing and impact resistance.

High flexibility of the carcass fabric to prevent bucking while wrapping on pulleys.

Available up to 1500 mm width and any number of plies.

Good interface adhesion of components for better flex life.

Better load carrying over long haulage.

Available in moulded rubber or tough slit edge finish.

Resistance to environmental operating conditions.

Resistance to heat and to high environmental temperatures.

Resistance to chemical products such as acid, oxidizing agents even at significant concentrations.

Good surface electrical conductivity, good resistance to fire and flame propagation.

General Purpose, Heat Resistant, Super Heat Resistant, Fire Resistant, Oil Resistant & Rough Top Belt

Grade	Application Characteristics	Conforming to Standards	Recommended For	Reinforcement Material
N-17	Moderately abrasive and non abrasive materials.	IS 1891 (part I) BS 490(part I) DIN 22102 IPSS-2-03-006	Rubble, sand (sharp), cement (ground), clay, slacked lime, charcoal, super phosphate (lump and powder), coal, ashes, soda earth, sand (smooth), pulp (dry) etc.	NN, EP
M-24	High tensile strength, superior in abrasion and cut resistance. Transporting highly abrasive materials.	IS 1891 (part I) BS 490(part I) DIN 22102 IPSS-2-03-006	Limestone, metallic ores, granite, Quartz, sand, BF clinker and slag, stone chips slate, coke, Sinter gravel etc.	NN, EP
HR	Heat and abrasion resistant lump 125^o C (max) fines 100^o C (max)	IS 1891(Part II)	Very good for general hot and moderately abrasive materials.	NN, EP
SHR	Heat and abrasion resistant lump 150^o C (max) fines 125^o C (max)	IS 1891(Part II)	Best for general hot materials and services such as steel clinker, hot sintered ores, steel pallets and others.	NN, EP
FR	Areas prone to fire hazards.	IS 1891 (part 5) CAN/CSA-M422-M87 DIN 22103 JISK 6324 AS-1334	Coal, coke and other fire prone materials.	NN, EP
FR-79	Extra high prone to fire hazards.	IS 1891 (part 5) CAN/CSA-M422-M87 DIN 22103 JISK 6324 AS-1334	Coal, coke and other fire prone materials.	NN, EP
OR		As Per International Standards	Carrying parts and components coated with machine oil & other oily materials.	NN, EP
Rough Top		As Per International Standards	These belts are specially designed with a Rough Top / Pimpled or Ribbed / Cleated carrying surface to prevent slippage.	Ideally suited to carry packaged materials on gradients of more than 20º. Low friction co-efficient with bare back bottom. Two or three plies of synthetic fabrics provide high strength & flexibility.

Conveyor Belts Selection Chart

Belt's Designation		Full Belt Tensile Strength	Maximum Recommended Working Tension		Nominal Carcass Thickness	Nominal Carcass Weight	Maximum belt width (mm) for adequate load support bulk density (t/m3)			Minimum belt width (mm) for adequate troughing
Type	Rating	Kn/m	Vulcanised splice	Mechanical fasteners Kn/m	(mm)	Kg / cm / mtr	Upto 1.0	Upto 1.5	Upto 2.5	20 Deg. Idlers	30 deg idlers	45 deg ilders
General duty	200/2 250/2 315/2 315/3 400/2 400/3 500/3 630/3	200 250 315 315 400 400 500 630	20 25 31 31 40 40 50 63	20 25 31 31 40 40 * *	2.4 2.5 2.7 3.2 2.8 3.4 3.4 3.5	0.022 0.023 0.024 0.025 0.025 0.027 0.030 0.031	650 650 900 1000 1000 1200 1200 1200	500 600 650 800 800 900 900 1000	- - - - 500 650 650 650 650 800	300 300 300 400 400 500 500 500	400 400 400 500 500 500 500 500	500 500 500 500 500 500 500 500
Heavy duty	200/2 250/2 315/2 315/3 400/2 400/3 400/4 500/3 500/4 630/3 630/4 800/4 1000/4 1000/5 1250/4 1250/5	200 250 315 315 400 400 400 500 500 630 630 800 1000 1000 1250 1250	20 25 31 31 40 40 44 50 55 63 70 90 110 110 140 140	20 25 31 31 40 40 40 * * * * * * * * *	2.8 3.0 3.1 3.6 3.2 3.6 4.5 3.7 4.5 3.9 5.0 5.4 5.8 6.6 6.5 7.1	0.026 0.028 0.029 0.030 0.030 0.032 0.044 0.034 0.046 0.036 0.049 0.051 0.054 0.066 0.062 0.080	800 800 1000 1200 1200 1200 1200 1400 1400 1600 1600 1600 1600 1600 1600 1600	650 650 800 1000 1000 1000 1000 1000 1200 1400 1600 1600 1600 1600 1600 1600	500 500 650 800 800 800 800 800 900 1200 1400 1600 1600 1600 1600 1600	400 400 400 500 500 500 500 500 500 650 650 650 800 800 800 900	400 400 500 500 500 500 500 500 650 800 800 900 900 900 900 900	500 500 500 500 500 650 650 650 650 800 900 900 1000 1000 1000 1000
Extra heavy duty	400/4 500/4 630/4 800/4 800/5 1000/4 1000/5 1250/4 1250/5 1400/4 1400/5 1600/4 1600/5	400 500 630 800 800 1000 1000 1250 1250 1400 1400 1600 1600	44 55 70 90 90 110 110 140 140 145 155 180 180	* * * * * * * * * * * * *	4.8 4.8 5.6 6.0 6.5 6.2 7.0 6.8 7.5 7.2 8.2 7.4 8.8	0.058 0.060 0.063 0.065 0.063 0.068 0.075 0.076 0.089 0.077 0.089 0.081 0.100	1200 1400 1400 1400 1600 1600 1600 1600 1600 1600 1600 1600 1600	1000 1000 1000 1200 1400 1400 1600 1600 1600 1600 1600 1600 1600	800 900 900 900 1200 1200 1400 1600 1400 1600 1600 1600 1600	500 500 500 500 600 600 750 750 800 750 800 800 800	500 500 500 500 650 750 900 800 900 800 900 900 900	500 500 500 650 800 900 1000 900 1000 1000 1200 1000 1200